GIS Internship - Training and Hurricanes

The internship with the Florida Department of Transportation (FDOT) at District 7 Headquarters has been quite eventful. I got started a bit later in the semester through the Volunteer Program, so I am approximately one third through the hours for GIS. Beyond mandatory training for state employees, I got started on putting together a training manual for ArcGIS Pro desktop to be used by the GIS Department in future classes for general employees. I also have partaken in weekly GIS Check-in and GIS Day Progress meetings.

Things changed two weeks ago with the expected development of what became Hurricane Helene in the Northwestern Caribbean Sea. From the beginning the projected path focused on the west coast of Florida and Big Bend region. Either way, the counties within District 7 would be affected, so the focus of FDOT shifted from routine day-to-day operations to storm preparation and emergency management applications.

Additionally the office closed for a couple of days and work-from-home was implemented for most employees. Being an intern, that left me waiting until the following week to resume work. But since I am considered an employee, I could still partake in Microsoft Teams communications from my home PC. So I was able to assist in putting together storm surge inundation graphics for upper management using raster data provided in the NHC Data in GIS Formats downloads page.

Potential Storm Surge Inundation for Hurricane Helene with Florida State Roads

Just over a week removed from Hurricane Helene, Tropical Storm Milton quickly formed within the Bay of Campeche over the southwestern Gulf of Mexico. The initial forecast track immediately targeted the Tampa Bay region. So again the focus at FDOT D7 shifted to emergency management operations and storm preparedness. The biggest difference this time was that FDOT played a role in logistics with relocating the massive amount of debris along the Pinellas County coastline that was the result of Hurricane Helene's storm surge.

The office closed again on Tuesday October 8 and remained close through Thursday. This meant my internship was again on hold, but similar to Helene, I could still contribute GIS related graphics from home. Storm surge being the biggest concern again, I put together another storm surge inundation map with GIS data downloaded from the NHC.

Hurricane Milton NHC Storm Surge Inundation for Tampa Bay with Florida State Roads

With the knowledge gained from class, I can quantify this data to show the total mileage of Florida State Roads potentially inundated by storm surge. Then by Calculating Statistics, aggregate the percent of state roads effected by county. One thing I have learned thus far with my internship at FDOT is that the turnaround time for producing a deliverable is often very short. Any premade styling or formatting is absolutely necessary and fine tuning an output map is more of a luxury than a necessity.

10/15/24 Update, after 120 hours of no electricity, water or internet due to Hurricane Milton, I finally have the opportunity to created a LinkedIn profile! While I have known about this platform for many years, my internship and recent classes gave me the impetus for making an account.

My approach to setting up the initial profile was to cover as many aspects of my experiences with Geographic Information Systems (GIS) and geography in general. Barring anymore hurricanes and as I get more time, especially as my internship with FDOT progresses, I will further expound upon my GIS work and classes with my profile.

Scale and Resolution Effects on Spatial Data

What a last two weeks it has been this semester. Hurricane Helene threatened the area during the final week of September, shifting everyone's focus to preparation and expected impacts. The storm center passed approximately 90 miles to our west. While coastal impacts were severe, we were spared the brunt inland, even keeping electricity throughout the storm.

Followed that with a preplanned trip for AARoads to Puerto Rico. Then got started on the final module for GIS Special Topics and increased my time investment into the module leading into this past weekend as newly named tropical storm Milton formed in the Bay of Campeche. A Category 5 hurricane as of this writing, Hurricane Milton is expected to make landfall somewhere on the west coast of Florida on Wednesday or Thursday. While wind shear is eventually expected to weaken the storm, unlike Helene, Debby, Idalia and other storms, Milton is forecast to be a major wind event for inland locations. So anxiety levels are high!

The sixth module for GIS Special Topics investigates the effects of scale on vector spatial data and resolution on raster spatial data. The lab also covers spatial data aggregation and the concept of gerrymandering using GIS.

There are multiple meanings of scale to consider for Geographic Information Systems (Zanbergen, 2004).

• as an indication of the relationship between units on a map and units in the real world. This is typically a representative fraction, which is commonly used with USGS Quads and GIS Maps in general.
• to indicate the extent of the area of interest. Examples include spatial areas such as neighborhoods, cities, counties and regions.
• to express the amount of detail or resolution. The resolution of a raster spatial dataset is the cell size, such as 10 meters for the Sentinel 2 blue, green and red spectral bands. This defines the scale of the data.

Scale in the Raster Data Model is straight forward represented by the resolution or cell size. A general rule is that a real world object needs to be at least as large as a cell in order to be recognizable.

Scale in the Vector Data Model also represents the amount of detail. While there is no single best method to express scale in vector data, a good indicator is the size of the smallest polygon or length of the shortest segment of a polyline.

When measuring the length of a complex shape, the total length depends on the smallest unit of the measuring tool. Where the units of a measuring tool decrease, the total length of the shape increases. More nodes and connecting segments result in longer shape lengths or area perimeters. The following images illustrate the differences in scale for the Vector Data Model.

Water flowline vector data for Wake County, NC in different scales

Waterbodies vector data for Wake County, NC in different scales

The properties of a Digital Elevation Model (DEM) depends upon what resolution is used. Higher resolution provides more detail. When measuring Slope, values decrease as the cell size increases and detail decreases. Higher detail results in steeper slopes. This effect applies to the full range of slopes regardless of steep areas of terrain (Zanbergen, 2004).

Quantification of Resolution vs. Slope for a DEM in lab

The Modifiable Areal Unit Problem (MAUP) factors into deciding what scale to use for analysis of spatial data. MAUP is a complication with statistical analysis when quantifying aerial data. There are two facets of MAUP.

Scale Effect

The optimal spatial scale for analysis is generally not known, as there are multiple scales for analysis to be theoretically considered (Manley 2013). The results of data can be manipulated positively or negatively depending upon upon the size of the aggregation units used.

Zoning Effect

The method used to create areal units. This effect is the result of how spatial data is separated, such as the grouping of smaller areal units into less numbers of larger areal units (Dark & Bram 2007). Changing the grouping can manipulate the results of spatial analysis.

Part 2 of the lab conducting Linear Regression analysis of poverty statistics for Florida in U.S. Census data resulted in an example of MAUP. Different levels of aggregation convey different results:

Linear Regression Results based upon Congressional District

Linear Regression Results based upon Counties

Linear Regression Results based upon Zip Codes

Gerrymandering is the purposeful manipulation of a district shape with intentional bias (Morgan & Evans, 2018) or to affect political power (Levitt, 2010). Partisan gerrymandering takes place when the political party controlling the redistricting process draws district lines to benefit itself and restrict opportunities for opposition parties. While this maneuvering aims to increase inordinately the political power of a group (Levitt, 2010), the U.S. Supreme Court ruled that partisan-focused gerrymandering is not unconstitutional  (Morgan & Evans, 2018).

GIS can measure gerrymandering by the compactness in a number of ways. Compactness is the only common rule pertaining to redestricting that takes into account the geometric shape of the district. A district is considered compact if it has a regular shape where constituents generally live near each other. A circular district is very compact while a linear district is not (Levitt, 2010). 

Thanks to a discussion board post from our classmate Emily Jane, a method for determining compactness that I found easy to interpret is the Reock Score. Using this method, geoprocessing determines the minimum bounding circle around each polygon of a Congressional District. That is the smallest circle that entirely encloses the district. Reock scoring uses the ratio of the district area to the minimum bounding circle with the following equation R=A_D/A_MBC where A_D is the area of the district and A_MBC is the area of the minimum bounding circle. The score ranges from 0, which is not compacted, to 1, which is optimally compact.

An example of the Minimum Bounding Circle around a District polygon for the Reock Score method 

Proceeded with the Reock Score analysis using the Minimum Bounding Geometry tool in ArcGIS Pro. This creates circular polygons for each record in the Congressional District dataset provided. With the minimum bounding circle area variable and the area value of the district, calculated the Reock score for every district. With a field added for the Reock Score, the worst "offenders" of gerrymandering based upon failing to have district 'compactness' from the provided dataset were determined.

Florida District 5 - 2nd worst gerrymandering 'offender'

North Carolina District 2 - the worst gerrymandering 'offender'

References

Zanbergen (2004). DEM Resolution. Vancouver Island University, Nanaimo, BC, Canada.

Manley, D. J. (2013). Scale, Aggregation, and the Modifiable Areal Unit Problem. In Handbook of Regional Science. Springer Verlag.

Dark, S. J., & Bram, D. (2007). The modifiable areal unit problem (MAUP) in physical geography. Progress in physical geography, 31(5), 471-479.

Morgan, J. D., & Evans, J. (2018). Aggregation of spatial entities and legislative redistricting. The geographic information science & technology body of knowledge, 2018(Q3).

Levitt, J. (2010). A Citizen's Guide to Redistricting. New York, NY: Brennan Center for Justice at New York University School of Law.